TARKO — Pumps | Pipes | Cables & Wires
    IS 4984:2016 + AMENDMENT 2

    PE80 PN 5 HDPE pipe weight per metre

    Weight per metre, wall thickness and inside diameter of PE80 PN 5 (SDR 21) pipe in every size, per IS 4984:2016 (Amendment 2).

    PE80 PN 5 HDPE pipe is made to SDR 21. In 110 mm it weighs 1.802 kg per metre with a 5.3–6.0 mm wall; the range runs from 0.249 kg/m at 40 mm to 908.884 kg/m at 2500 mm.

    Open the interactive calculator Full weight chart guide

    PE80 PN 5: weight by size

    metres
    SIZE (OD)SDRWALL (MM)INSIDE ØKG / METREKG FOR 100 M
    40 mm212.0–2.336.00.24925
    50 mm212.4–2.845.20.37738
    63 mm213.0–3.457.00.58559
    75 mm213.6–4.167.80.83784
    90 mm214.3–4.981.41.201120
    110 mm215.3–6.099.41.802180
    125 mm216.0–6.7113.02.303230
    140 mm216.7–7.5126.62.884288
    160 mm217.7–8.6144.63.782378
    180 mm218.6–9.6162.84.753475
    200 mm219.6–10.7180.85.889589
    225 mm2110.8–12.0203.47.442744
    250 mm2112.0–13.3226.09.176918
    280 mm2113.4–14.9253.211.5041,150
    315 mm2115.0–16.6285.014.4471,445
    355 mm2117.0–18.8321.018.4521,845
    400 mm2119.1–21.2361.823.4062,341
    450 mm2121.5–23.8407.029.5812,958
    500 mm2123.9–26.4452.236.4973,650
    560 mm2126.7–29.5506.645.6794,568
    630 mm2130.0–33.1570.057.7045,770
    710 mm2133.9–37.4642.273.5817,358
    800 mm2138.1–42.1723.893.1849,318
    900 mm2142.9–47.3814.2118.00811,801
    1000 mm2147.7–52.6904.6145.79614,580
    1200 mm2157.2–63.11,085.6209.66420,966
    1400 mm2166.7–73.51,266.6285.33828,534
    1600 mm2176.2–84.01,447.6372.29637,230
    1800 mm2185.8–94.51,628.4471.78847,179
    2000 mm2195.3–105.01,809.4581.85158,185
    2250 mm21107.2–118.12,035.6736.28973,629
    2500 mm21119.1–131.22,261.8908.88490,888

    Weights are the standard's reference values in kg per metre; walls are minimum–maximum from Table 4 of IS 4984:2016 as amended by Amendment 2. Inside diameter ≈ OD − 2 × minimum wall (the largest possible hole). Real pipes vary slightly within the wall tolerance.

    Questions people ask

    How much does PE80 PN 5 pipe weigh per metre?

    PE80 PN 5 HDPE pipe is made to SDR 21. In 110 mm it weighs 1.802 kg per metre with a 5.3–6.0 mm wall; the range runs from 0.249 kg/m at 40 mm to 908.884 kg/m at 2500 mm.

    What does PN 5 mean?

    PN 5 is a nominal pressure of 5 bar — about 50 metres of water head — that the pipe is rated to carry continuously with water at 27 °C, worked out from the plastic's 50-year strength at 20 °C (MRS).

    Which sizes are made in PE80 PN 5?

    32 sizes, from 40 mm to 2500 mm, all at SDR 21.

    Do other grades have the same wall as PE80 PN 5?

    The wall depends on SDR (21 here), not the grade, so the weight is identical — but the pressure rating changes: PE100 at SDR 21 is PN 6, PE63 at SDR 21 is PN 4.

    Weight by pipe size

    16 mm20 mm25 mm32 mm40 mm50 mm63 mm75 mm90 mm110 mm125 mm140 mm160 mm180 mm200 mm225 mm250 mm280 mm315 mm355 mm400 mm450 mm500 mm560 mm630 mm710 mm800 mm900 mm1000 mm1200 mm1400 mm1600 mm1800 mm2000 mm2250 mm2500 mm

    PE100 pipe weight by pressure

    PE100 PN 3.2PE100 PN 4PE100 PN 5PE100 PN 6PE100 PN 8PE100 PN 10PE100 PN 12.5PE100 PN 16PE100 PN 20

    PE80 pipe weight by pressure

    PE80 PN 2.5PE80 PN 3.2PE80 PN 4PE80 PN 5PE80 PN 6PE80 PN 8PE80 PN 10PE80 PN 12.5PE80 PN 16PE80 PN 20

    PE63 pipe weight by pressure

    PE63 PN 2PE63 PN 2.5PE63 PN 3.2PE63 PN 4PE63 PN 5PE63 PN 6PE63 PN 8
    Check the numbers against the standard: get IS 4984:2016 and Amendment 2 from BIS.
    Learn how to read the chart

    Need a quote?

    Tell us the size, grade, PN and length — we'll send a quotation with the weight worked out.

    Request a Quote +91 98500 66233