TARKO — Pumps | Pipes | Cables & Wires

    Agriculture HDPE Pipes

    Engineered for Indian farming conditions — UV-stabilized, pressure-rated HDPE pipes for drip, sprinkler, and flood irrigation systems from 20mm to 315mm.

    20mm – 315mm

    Diameter Range

    PN 2.5 – PN 10

    Pressure Classes

    PE100 Virgin Resin

    Material Grade

    2–2.5% Carbon Black

    UV Resistance

    Up to 110mm OD

    Coil Sizes

    IS 4984:2016

    Standard

    Call for QuoteWhatsApp Quote

    Indian agriculture is rapidly modernizing with micro-irrigation and pressurized pipe networks replacing open-channel water conveyance. TARKO PE100 HDPE agriculture pipes are designed for the demands of Indian farming — high UV exposure, buried and surface-laid operation, pump-induced pressure surges, and decades of maintenance-free service.

    HDPE pipes are the preferred material for modern agricultural irrigation because they are lightweight (easy for farmers to carry and lay), flexible (can follow field contours without fittings), corrosion-free (no rust underground or in open fields), and have leak-proof welded or compression joints that prevent the water losses common in PVC and cement-lined systems.

    TARKO manufactures agriculture HDPE pipes from 20mm (drip laterals) to 315mm (high-flow pump discharge and distribution mains) in pressure classes PN 2.5 to PN 10. Our pipes are UV-stabilized with 2–2.5% carbon black for surface-laid use in open fields, and conform to IS 4984:2016 — the standard required for PMKSY and state irrigation scheme subsidies.

    Whether you're setting up a drip irrigation system for a 2-acre plot or laying mainlines for a 200-hectare farm, TARKO supplies directly from our Nagpur factory with no middlemen, fast dispatch, and technical support on pipe sizing and pressure selection.

    Why Choose TARKO Agriculture HDPE Pipes?

    Engineered for performance, certified for quality, priced for value.

    Built for Indian Farms

    UV-stabilized for open-field use, flexible for field contours, and available in coils up to 110mm for easy transport by tractor or tempo.

    All Irrigation Methods

    Suitable for drip, sprinkler, flood, and micro-sprinkler systems. Mainlines, sub-mains, laterals, and pump discharge lines.

    PMKSY Subsidy Eligible

    IS 4984:2016 BIS certified — required for Pradhan Mantri Krishi Sinchayee Yojana (PMKSY) subsidies and state irrigation schemes.

    50+ Year Service Life

    Outlasts PVC (20 yrs), GI (15 yrs), and cement pipes by decades. One investment for a lifetime of farming.

    Zero Leakage

    Welded joints for permanent installations, compression fittings for seasonal systems. No water loss at joints.

    Factory-Direct Pricing

    No dealer markups. Direct from our MIDC Hingna, Nagpur factory to your farm gate.

    Applications

    • Drip irrigation mainlines and sub-mains
    • Sprinkler irrigation mains (quick-coupling compatible)
    • Submersible pump discharge lines
    • Farm pond and reservoir supply lines
    • Micro-sprinkler and micro-irrigation systems
    • Pressurized pipeline irrigation networks (PMKSY)
    • Sugar cane and cotton field irrigation
    Agriculture HDPE Pipes applications — TARKO

    Technical Specifications

    Diameter Range20mm – 315mm
    Pressure ClassesPN 2.5 – PN 10
    Material GradePE100 Virgin Resin
    UV Resistance2–2.5% Carbon Black
    Coil SizesUp to 110mm OD
    StandardIS 4984:2016
    View Full Size & Pressure Charts

    Frequently Asked Questions

    Common questions about Agriculture HDPE Pipes

    For drip irrigation, 40–63mm sub-mains and 75–110mm mainlines are standard. Lateral lines (drippers) are typically LLDPE 12–16mm. TARKO supplies the mainline and sub-main HDPE pipes that feed drip systems.
    Yes. TARKO HDPE pipes are BIS/ISI certified under IS 4984:2016, which is the mandatory standard for PMKSY micro-irrigation subsidy eligibility. We provide all required documentation including BIS licence copy and test certificates.
    HDPE pipe price varies by diameter, pressure class, and quantity. As a direct manufacturer, TARKO offers factory pricing without dealer markups. Call +91 98500 66233 or request a quote for current per-metre rates.
    For most farming applications, yes. HDPE is more flexible, UV-resistant, handles pressure surges better, has leak-proof joints, and lasts 50+ years vs 20 years for PVC. The only case for PVC is very low-pressure gravity systems where PVC's rigidity is actually needed.
    Yes. HDPE is ideal for submersible pump risers and discharge lines because it handles pressure surges (water hammer) from pump start/stop cycles without cracking. Use PN 10 or PN 12.5 for depths beyond 50 meters.
    Yes. We deliver across Maharashtra and all of India from our Nagpur factory. Most Vidarbha locations receive same-day dispatch. Call for delivery timelines to your area.

    Need Agriculture HDPE Pipes? Get Factory-Direct Pricing

    TARKO manufactures and supplies directly from our BIS-certified factory in Nagpur. No middlemen, no markups — just the best HDPE pipes at the best price.

    Call +91 98500 66233WhatsApp QuoteRequest Detailed Quote