HDPE Pipe Fittings
Every connector you need to build a leak-proof HDPE network — butt fusion, electrofusion and compression fittings, plus flanges and transitions to metal. Matched to TARKO IS 4984:2016 pipe, from 20mm to 630mm.
HDPE Pipe Fittings — Product Range & Catalog
HDPE Molded Fittings
Sizes Available90° Molded Elbow
Injection molded 90-degree elbow for high-pressure direction changes in HDPE pipelines.
Sizes AvailableConcentric Reducer
Molded concentric reducer for smooth line size reduction along central pipe axis.
Sizes AvailableEccentric Reducer Single Stage
Single-stage eccentric reducer maintaining bottom-of-pipe alignment for drainage and slurries.
Sizes AvailableMolded End Cap
Heavy-wall molded end cap for sealing pipeline terminations under working pressure.
Sizes AvailableExtrusion Molded End Cap
Large-diameter extrusion molded cap for heavy-duty pipeline closing.
Sizes AvailableExtrusion Molded Pipe End Stub End
Molded pipe-end stub end for flanged jointing with metal backing rings per IS 4984.
Sizes AvailableExtrusion Molded Weld Neck
Reinforced weld neck stub end for high-stress flanged connections.
Sizes AvailableHDPE Blind Flange
Solid HDPE blind flange for closing flanged pipe ends and inspection points.
Sizes AvailableHDPE Puddle Flange
Water-stop puddle flange for leak-proof pipe passage through concrete walls and tanks.
Sizes AvailableHDPE Slip On Flange
HDPE slip-on backing flange for corrosion-free bolted flange assemblies.
Sizes AvailableMoulded Y
45-degree molded Y-branch fitting for low-friction flow splitting.
Sizes AvailableSandwich Flange
Double-sided sandwich flange for high-integrity bolted sealing between pipe sections.
Sizes AvailableMolded Equal Tee
Standard 90-degree equal branch tee for distribution manifolds.
HDPE Fabricated Fittings
Sizes AvailableBend 11.25°
Custom-welded 11.25° mitred bend for gentle directional alignment in large pipelines.
Sizes AvailableBend 22.5°
Fabricated 22.5° mitred bend for pipeline elevation and direction changes.
Sizes AvailableBend 30°
Fabricated 30° mitred bend for smooth flow transition.
Sizes AvailableBend 45°
Fabricated 45° multi-segment mitred bend for medium directional turns.
Sizes AvailableBend 60°
Fabricated 60° multi-segment mitred bend for wide angle turns.
Sizes AvailableBend 90° - ISO 4427
Multi-segment 90° mitred bend manufactured to ISO 4427 international standards.
Sizes AvailableBend 90°
Standard 4-segment 90° fabricated bend for mainlines.
Sizes AvailableFabricated Long Radius Bend
Long-radius fabricated bend for low head-loss slurry and gravity lines.
Sizes AvailableEqual Cross
4-way equal cross fitting for 90° double-branch manifold junctions.
Sizes AvailableEqual Flanged Tee
Fabricated tee with pre-welded flanged ends on all three branches.
Sizes AvailableEqual Tee - ISO 4427
ISO 4427 compliant equal branch tee for heavy-duty mainlines.
Sizes AvailableEqual Tee
Standard fabricated 90° branch tee for large diameter pipelines.
Sizes AvailableY Tee
45-degree fabricated Y-branch tee for low-turbulence effluent and drainage flow.
HDPE Pipe Fittings — Features & Benefits
Butt Fusion Fittings
Heat-welded, permanent joints for 63mm and above
Electrofusion Fittings
Built-in heating coil — ideal in tight trenches
Compression Fittings
No tools or heat — quick 20–110mm connections
Flanges & Transition
Connect HDPE to valves, pumps, and metal pipes
HDPE Pipe Fittings — Applications & Uses
Water Supply Networks
Irrigation Systems
Industrial Piping
Sewerage Networks
Borewell Connections
Cable Duct Joints
Why Choose TARKO HDPE Fittings?
TARKO supplies the complete range of HDPE pipe fittings — butt fusion, electrofusion, compression, and flanges — matched precisely to our IS 4984:2016 pipes. Every fitting is made from the same PE100 grade resin as the pipe for a consistent, long-lasting system.