IS 4984:2016 + AMENDMENT 2

PE80 PN 3.2 HDPE pipe weight per metre

Weight per metre, wall thickness and inside diameter of PE80 PN 3.2 (SDR 33) pipe in every size, per IS 4984:2016 (Amendment 2).

PE80 PN 3.2 HDPE pipe is made to SDR 33. In 110 mm it weighs 1.187 kg per metre with a 3.4–3.9 mm wall; the range runs from 0.554 kg/m at 75 mm to 589.529 kg/m at 2500 mm.

Open the interactive calculator Full weight chart guide

PE80 PN 3.2: weight by size

Length of your ordermetres

SIZE (OD)	SDR	WALL (MM)	INSIDE Ø	KG / METRE	KG FOR 100 M
75 mm	33	2.3–2.7	70.4	0.554	55
90 mm	33	2.8–3.2	84.4	0.798	80
110 mm	33	3.4–3.9	103.2	1.187	119
125 mm	33	3.8–4.3	117.4	1.497	150
140 mm	33	4.3–4.9	131.4	1.905	191
160 mm	33	4.9–5.5	150.2	2.460	246
180 mm	33	5.5–6.2	169.0	3.113	311
200 mm	33	6.1–6.9	187.8	3.846	385
225 mm	33	6.9–7.7	211.2	4.857	486
250 mm	33	7.6–8.5	234.8	5.952	595
280 mm	33	8.5–9.5	263.0	7.454	745
315 mm	33	9.6–10.7	295.8	9.456	946
355 mm	33	10.8–12.0	333.4	11.972	1,197
400 mm	33	12.2–13.6	375.6	15.271	1,527
450 mm	33	13.7–15.2	422.6	19.234	1,923
500 mm	33	15.2–16.9	469.6	23.753	2,375
560 mm	33	17.0–18.8	526.0	29.656	2,966
630 mm	33	19.1–21.2	591.8	37.578	3,758
710 mm	33	21.6–23.9	666.8	47.852	4,785
800 mm	33	24.3–26.9	751.4	60.624	6,062
900 mm	33	27.3–30.2	845.4	76.599	7,660
1000 mm	33	30.4–33.6	939.2	94.725	9,473
1200 mm	33	36.4–40.2	1,127.2	136.061	13,606
1400 mm	33	42.5–46.9	1,315.0	185.416	18,542
1600 mm	33	48.5–53.5	1,503.0	241.783	24,178
1800 mm	33	54.6–60.2	1,690.8	306.136	30,614
2000 mm	33	60.7–66.9	1,878.6	377.757	37,776
2250 mm	33	68.2–75.2	2,113.6	477.615	47,762
2500 mm	33	75.8–83.5	2,348.4	589.529	58,953

Weights are the standard's reference values in kg per metre; walls are minimum–maximum from Table 4 of IS 4984:2016 as amended by Amendment 2. Inside diameter ≈ OD − 2 × minimum wall (the largest possible hole). Real pipes vary slightly within the wall tolerance.

Questions people ask

How much does PE80 PN 3.2 pipe weigh per metre?

PE80 PN 3.2 HDPE pipe is made to SDR 33. In 110 mm it weighs 1.187 kg per metre with a 3.4–3.9 mm wall; the range runs from 0.554 kg/m at 75 mm to 589.529 kg/m at 2500 mm.

What does PN 3.2 mean?

PN 3.2 is a nominal pressure of 3.2 bar — about 32 metres of water head — that the pipe is rated to carry continuously with water at 27 °C, worked out from the plastic's 50-year strength at 20 °C (MRS).

Which sizes are made in PE80 PN 3.2?

29 sizes, from 75 mm to 2500 mm, all at SDR 33.

Do other grades have the same wall as PE80 PN 3.2?

The wall depends on SDR (33 here), not the grade, so the weight is identical — but the pressure rating changes: PE100 at SDR 33 is PN 4, PE63 at SDR 33 is PN 2.5.

Weight by pipe size

PE100 pipe weight by pressure

PE100 PN 3.2 PE100 PN 4 PE100 PN 5 PE100 PN 6 PE100 PN 8 PE100 PN 10 PE100 PN 12.5 PE100 PN 16 PE100 PN 20

PE80 pipe weight by pressure

PE80 PN 2.5 PE80 PN 3.2 PE80 PN 4 PE80 PN 5 PE80 PN 6 PE80 PN 8 PE80 PN 10 PE80 PN 12.5 PE80 PN 16 PE80 PN 20

PE63 pipe weight by pressure

PE63 PN 2 PE63 PN 2.5 PE63 PN 3.2 PE63 PN 4 PE63 PN 5 PE63 PN 6 PE63 PN 8

Check the numbers against the standard: get IS 4984:2016 and Amendment 2 from BIS.

Learn how to read the chart

Need a quote?

Tell us the size, grade, PN and length — we'll send a quotation with the weight worked out.

Request a Quote +91 98500 66233