TARKO — Pumps | Pipes | Cables & Wires
    IS 4984:2016 + AMENDMENT 2

    PE100 PN 8 HDPE pipe weight per metre

    Weight per metre, wall thickness and inside diameter of PE100 PN 8 (SDR 17) pipe in every size, per IS 4984:2016 (Amendment 2).

    PE100 PN 8 HDPE pipe is made to SDR 17. In 110 mm it weighs 2.174 kg per metre with a 6.5–7.3 mm wall; the range runs from 0.196 kg/m at 32 mm to 710.138 kg/m at 2000 mm.

    Open the interactive calculator Full weight chart guide

    PE100 PN 8: weight by size

    metres
    SIZE (OD)SDRWALL (MM)INSIDE ØKG / METREKG FOR 100 M
    32 mm172.0–2.328.00.19620
    40 mm172.4–2.835.20.29730
    50 mm173.0–3.444.00.45846
    63 mm173.8–4.355.40.73073
    75 mm174.5–5.166.01.030103
    90 mm175.3–6.079.41.457146
    110 mm176.5–7.397.02.174217
    125 mm177.4–8.3110.22.812281
    140 mm178.3–9.3123.43.531353
    160 mm179.5–10.6141.04.606461
    180 mm1710.6–11.8158.85.778578
    200 mm1711.8–13.1176.47.136714
    225 mm1713.3–14.8198.49.064906
    250 mm1714.8–16.4220.411.1821,118
    280 mm1716.5–18.3247.013.9641,396
    315 mm1718.6–20.6277.817.6941,769
    355 mm1720.9–23.1313.222.3912,239
    400 mm1723.6–26.1352.828.4902,849
    450 mm1726.5–29.3397.035.9903,599
    500 mm1729.5–32.6441.044.5004,450
    560 mm1733.0–36.4494.055.7095,571
    630 mm1737.1–41.0555.870.5697,057
    710 mm1741.8–46.1626.489.5988,960
    800 mm1747.1–52.0705.8113.71211,371
    900 mm1753.0–58.4794.0143.94114,394
    1000 mm1758.9–64.9882.2177.73517,774
    1200 mm1770.6–77.81,058.8255.68125,568
    1400 mm1782.4–90.81,235.2347.82134,782
    1600 mm1794.2–103.61,411.6453.99145,399
    1800 mm17105.9–116.61,588.2575.04357,504
    2000 mm17117.7–129.61,764.6710.13871,014

    Weights are the standard's reference values in kg per metre; walls are minimum–maximum from Table 4 of IS 4984:2016 as amended by Amendment 2. Inside diameter ≈ OD − 2 × minimum wall (the largest possible hole). Real pipes vary slightly within the wall tolerance.

    Questions people ask

    How much does PE100 PN 8 pipe weigh per metre?

    PE100 PN 8 HDPE pipe is made to SDR 17. In 110 mm it weighs 2.174 kg per metre with a 6.5–7.3 mm wall; the range runs from 0.196 kg/m at 32 mm to 710.138 kg/m at 2000 mm.

    What does PN 8 mean?

    PN 8 is a nominal pressure of 8 bar — about 80 metres of water head — that the pipe is rated to carry continuously with water at 27 °C, worked out from the plastic's 50-year strength at 20 °C (MRS).

    Which sizes are made in PE100 PN 8?

    31 sizes, from 32 mm to 2000 mm, all at SDR 17.

    Do other grades have the same wall as PE100 PN 8?

    The wall depends on SDR (17 here), not the grade, so the weight is identical — but the pressure rating changes: PE80 at SDR 17 is PN 6, PE63 at SDR 17 is PN 5.

    Weight by pipe size

    16 mm20 mm25 mm32 mm40 mm50 mm63 mm75 mm90 mm110 mm125 mm140 mm160 mm180 mm200 mm225 mm250 mm280 mm315 mm355 mm400 mm450 mm500 mm560 mm630 mm710 mm800 mm900 mm1000 mm1200 mm1400 mm1600 mm1800 mm2000 mm2250 mm2500 mm

    PE100 pipe weight by pressure

    PE100 PN 3.2PE100 PN 4PE100 PN 5PE100 PN 6PE100 PN 8PE100 PN 10PE100 PN 12.5PE100 PN 16PE100 PN 20

    PE80 pipe weight by pressure

    PE80 PN 2.5PE80 PN 3.2PE80 PN 4PE80 PN 5PE80 PN 6PE80 PN 8PE80 PN 10PE80 PN 12.5PE80 PN 16PE80 PN 20

    PE63 pipe weight by pressure

    PE63 PN 2PE63 PN 2.5PE63 PN 3.2PE63 PN 4PE63 PN 5PE63 PN 6PE63 PN 8
    Check the numbers against the standard: get IS 4984:2016 and Amendment 2 from BIS.
    Learn how to read the chart

    Need a quote?

    Tell us the size, grade, PN and length — we'll send a quotation with the weight worked out.

    Request a Quote +91 98500 66233