IS 4984:2016 + AMENDMENT 2

PE100 PN 3.2 HDPE pipe weight per metre

Weight per metre, wall thickness and inside diameter of PE100 PN 3.2 (SDR 41) pipe in every size, per IS 4984:2016 (Amendment 2).

PE100 PN 3.2 HDPE pipe is made to SDR 41. In 110 mm it weighs 0.949 kg per metre with a 2.7–3.1 mm wall; the range runs from 0.479 kg/m at 75 mm to 477.484 kg/m at 2500 mm.

Open the interactive calculator Full weight chart guide

PE100 PN 3.2: weight by size

Length of your ordermetres

SIZE (OD)	SDR	WALL (MM)	INSIDE Ø	KG / METRE	KG FOR 100 M
75 mm	41	2.0–2.3	71.0	0.479	48
90 mm	41	2.2–2.6	85.6	0.643	64
110 mm	41	2.7–3.1	104.6	0.949	95
125 mm	41	3.1–3.6	118.8	1.246	125
140 mm	41	3.5–4.0	133.0	1.562	156
160 mm	41	4.0–4.5	152.0	2.024	202
180 mm	41	4.4–5.0	171.2	2.520	252
200 mm	41	4.9–5.5	190.2	3.096	310
225 mm	41	5.5–6.2	214.0	3.918	392
250 mm	41	6.1–6.9	237.8	4.840	484
280 mm	41	6.9–7.7	266.2	6.084	608
315 mm	41	7.7–8.6	299.6	7.643	764
355 mm	41	8.7–9.7	337.6	9.723	972
400 mm	41	9.8–10.9	380.4	12.325	1,233
450 mm	41	11.0–12.2	428.0	15.541	1,554
500 mm	41	12.2–13.6	475.6	19.215	1,922
560 mm	41	13.7–15.2	532.6	24.092	2,409
630 mm	41	15.4–17.1	599.2	30.499	3,050
710 mm	41	17.4–19.3	675.2	38.812	3,881
800 mm	41	19.6–21.7	760.8	49.215	4,922
900 mm	41	22.0–24.3	856.0	62.126	6,213
1000 mm	41	24.4–27.0	951.2	76.571	7,657
1200 mm	41	29.3–32.4	1,141.4	110.298	11,030
1400 mm	41	34.2–37.8	1,331.6	150.161	15,016
1600 mm	41	39.1–43.2	1,521.8	196.162	19,616
1800 mm	41	44.0–48.5	1,712.0	248.039	24,804
2000 mm	41	48.8–53.8	1,902.4	305.958	30,596
2250 mm	41	54.9–60.5	2,140.2	386.827	38,683
2500 mm	41	61.0–67.2	2,378.0	477.484	47,748

Weights are the standard's reference values in kg per metre; walls are minimum–maximum from Table 4 of IS 4984:2016 as amended by Amendment 2. Inside diameter ≈ OD − 2 × minimum wall (the largest possible hole). Real pipes vary slightly within the wall tolerance.

Questions people ask

How much does PE100 PN 3.2 pipe weigh per metre?

PE100 PN 3.2 HDPE pipe is made to SDR 41. In 110 mm it weighs 0.949 kg per metre with a 2.7–3.1 mm wall; the range runs from 0.479 kg/m at 75 mm to 477.484 kg/m at 2500 mm.

What does PN 3.2 mean?

PN 3.2 is a nominal pressure of 3.2 bar — about 32 metres of water head — that the pipe is rated to carry continuously with water at 27 °C, worked out from the plastic's 50-year strength at 20 °C (MRS).

Which sizes are made in PE100 PN 3.2?

29 sizes, from 75 mm to 2500 mm, all at SDR 41.

Do other grades have the same wall as PE100 PN 3.2?

The wall depends on SDR (41 here), not the grade, so the weight is identical — but the pressure rating changes: PE80 at SDR 41 is PN 2.5, PE63 at SDR 41 is PN 2.

Weight by pipe size

PE100 pipe weight by pressure

PE100 PN 3.2 PE100 PN 4 PE100 PN 5 PE100 PN 6 PE100 PN 8 PE100 PN 10 PE100 PN 12.5 PE100 PN 16 PE100 PN 20

PE80 pipe weight by pressure

PE80 PN 2.5 PE80 PN 3.2 PE80 PN 4 PE80 PN 5 PE80 PN 6 PE80 PN 8 PE80 PN 10 PE80 PN 12.5 PE80 PN 16 PE80 PN 20

PE63 pipe weight by pressure

PE63 PN 2 PE63 PN 2.5 PE63 PN 3.2 PE63 PN 4 PE63 PN 5 PE63 PN 6 PE63 PN 8

Check the numbers against the standard: get IS 4984:2016 and Amendment 2 from BIS.

Learn how to read the chart

Need a quote?

Tell us the size, grade, PN and length — we'll send a quotation with the weight worked out.

Request a Quote +91 98500 66233